Question: How Fast Can You Go With 4.10 Gears?

How much does it cost to install 4.10 gears?

Installation costs will vary, but a good rule of thumb is between $250 and $300.

Be sure to work with a reliable shop that you trust for installations.

You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above..

Are 3.73 or 4.10 gears better?

Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed. So, by changing your gear ratio, no power levels are being changed, just the torque….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOBetter gas mileageWorse gas mileageHigher top speedLower top speed2 more rows•May 12, 2020

How much does it cost to have a ring and pinion install?

Depending on the year, make, and model of your vehicle, the cost of an aftermarket ring and pinion set may fall anywhere between $50 and $1,700. The ring and pinion gears can be purchased per piece, in sets of two, or part of a kit.

How long does it take to replace rear differential?

The bearings in the rear diff include the pinion bearing and the side bearing. Both can deteriorate or pit over time, which will lead to rear diff noise. If you need to replace one of the bearings, expect the process to take between three and five hours for a trained mechanic to complete.

Is 3.08 a good gear ratio?

Two common base axle ratios for trucks are 3.08 and 3.42. A 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.

Which gear ratio is faster?

The higher the number the better the car will accelerate, but at the expense of high speed cruising. Now for the confusing part of the story. A high numerical gear ratio is called a low gear or low rear end, and vice versa. Low gears give fast acceleration, high gears give better cruising.

Will 4.10 gears make my car faster?

Most late model Mustangs and many other sports cars come equipped with standard 3.55 gears in their rear differential, however by adding 4.10 gears they can effectively make their drag times faster and deliver more power to the wheels faster.

Is a 4.10 gear ratio good?

FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.

What are 4.11 gears good for?

4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.

Does gear ratio affect horsepower?

Motor HP does not change when you change gear ratios. The only thing that changes is torque. A dynamometer measures torque and RPM, and from those two values calculates horsepower. When you change gear ratios both RPM and torque will change but horsepower will not.

How much does it cost to install Gears?

Dealers typically charge about $90-$95 per hour. Speed shops usually charge about $80-$120 per hour, so labor “should” be about $300-$400 for a properly installed gear set that’s done-right-the-first-time. Add in cost of parts, supplies, fluids, shims, bearings, etc.

Are 3.73 gears good for highway?

Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc. Always remember, for very “give” there is a “take”.