How Many Coats Fit In A Closet?

How big should a coat closet be?

Coat closets should have a minimum of 28 inches of depth — 30 inches is ideal — to prevent sleeves and bulky coats from interfering with the closet door..

How big is a hall closet?

Planning the Design. Take a few different perspectives and known measurements into account before you begin the design phase. A typical linen closet is usually 30 to 36 inches wide. This width allows for side-by-side storage of towels, bed sheets and other items on the shelves.

What is considered a large walk in closet?

As a rule of thumb, a four-feet wide area will accommodate storage space on one side. A six feet wide walk-in can make room for storage on all three walls. And a 10 feet wide room can sport an island.

What is standard depth for a closet?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.

How high should a coat closet shelf be?

between 87 and 96 inchesIdeally, the top shelf of a closet is high enough to tuck items out of the way, but low enough that you can retrieve them without a stool. The recommended shelf height is between 87 and 96 inches from the floor. The shelf should also sit at least a foot away from the closet ceiling.

How long can closet rods go without support?

How long can closet rods go without support? Closet Rod is available in custom lengths up to 96 inches. A center support is required for beams longer than 48 inches. Additional supports are recommended if the closet rod will be supporting especially heavy apparel (i.e. winter coats, heavy weight suits, etc.).

How wide should a clothes closet be?

A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women’s shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.

How narrow can a closet door be?

You may also find a few narrower doors in stock, including 30 inches, 28 inches, and 24 inches. Code allows these narrower widths as closet and utility doors. You may possibly find 36-inch-wide doors in stock.

How much space should be between closet rod and shelf?

A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

What is the average size of a master bedroom walk in closet?

A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.

What is the standard size of a bedroom closet?

A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.

How tall is a closet?

A typical reach-in closet is approximately 6-feet long, 8-feet high, 24-inches deep with an 80-inch high door opening. Reach-in closets are very practical for a single occupant.

What is standard shelf spacing?

Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves. To prevent the case from looking and being top-heavy, use a smaller shelf spacing near the top and a larger one near the bottom.

How deep should walk in closet be?

4 feetWalk-in closets should be a minimum of 4 feet wide by 4 feet deep. With these minimum dimensions, the closet will accommodate shelves and hanging space on one side wall and the back wall.